Our mounting clips provide a fast and simple way to install your rope lights. It can be attached on the wall, wood surface as well as stuck on the iron or glass surface. They are the best choice for your installation. We recommend installing one clip every 6 inches.
This set includes:... more >>>
Mini 8 Function Controller 2 Wire 1/2 Inch (For Cut)
This controller can create eight fantastic lighting effects on the rope light.
Eight effects includes:
1. Combination
2. In Waves
3. Sequential
4. SLO-GLO
5. Chasing/Flashing
6. Slow fade
7. Twinkle
8. Steady on
This set includes:
1 Mini Controller
1 Power Co... more >>>
Mini 8 Function Controller 2 Wire 1/2 Inch (Non Cut)
This controller can create eight fantastic lighting effects on the rope light.
Eight effects includes:
1. Combination
2. In Waves
3. Sequential
4. SLO-GLO
5. Chasing/Flashing
6. Slow fade
7. Twinkle
8. Steady on
This set includes:
1 Mini Controller
Suitabl... more >>>
The Clear Mounting Track can be attached on the wall, wood surface as well as stuck on the iron or glass surface. It is used to straighten the rope light. Clear Mounting Track run the length of the rope light to hold it tight and perfectly straight. UV Rating for Outdoor and Indoor. P... more >>>
The Clear Mounting Track can be attached on the wall, wood surface as well as stuck on the iron or glass surface. It is used to straighten the rope light. Clear Mounting Track run the length of the rope light to hold it tight and perfectly straight. UV Rating for Outdoor and Indoor. Perf... more >>>
The Easy Splice Connector is for connecting two rope lights with less visible on the joint. The connection gives less visible on the joint, making it appears the same as the original rope light. For the maximum protection and environmental exposure, use heat shrink tubing to completely seal the sp... more >>>
This Connector is for connecting two rope lights in a quick and easy way.It is the most common splice connector for the rope light. Connect the rope light by the pin and tighten with the screw caps, the installation is simple and secure.
This set includes:
1 Splic Connector with two... more >>>
This Splice Connector is for connecting two rope lights in a extra protection way. The connection provides greater weatherproof on the joint, making it to avoid oxidization easily. For the maximum protection, use heat shrink tubing and sealant to completely seal the splice.
This set i... more >>>
Connect two rope lights with a easy splice connector, seal with the heat shrink tubing, and reinforce by a house clamp, gives you the strongest mechanical connection between the rope lights. A great accessory for rope light secure! This set of house clamp only available in Orange Tree Trade.
&n... more >>>
This T Connector is for connecting three rope lights in a quick and easy way. It is a common connector for the rope light. Connect the rope light by the pin and tighten with the screw caps, the installation is simple and secure.
This set includes:
1 Screw Type T Connector with three... more >>>
This T Connector is for connecting three rope lights in a T shape. The connection provides greater weatherproof on the joint, making it to avoid oxidization easily. For the maximum protection, use heat shrink tubing and sealant to completely seal the splice.
This set includes:
1 PVC... more >>>
This cross connector is for connecting four rope lights in a cross shape. The connection provides greater weatherproof on the joint, making it to avoid oxidization easily. For the maximum protection, use heat shrink tubing and sealant to completely seal the splice.
This set includes: ... more >>>
This power connector creates a connection between various accessories and rope light.
Suitable for:
½ Inch Cuttable 2-Wire LED Rope Light
Compatible with:
Female-Female Extension Cord;
Female-Male Extension Cord;
Power Cord-Screw Type;
Learn more about DIY p... more >>>